WWW.RAINPROCO.COM
PRO 2 9
The eld wiring from the controller to the decoders consists of one, 2-wire run, which
The eld wiring from the controller to the decoders consists of one, 2-wire run, which
The eld wiring from the controller to the decoders consists of one, 2-wire run, which
connects in series, to each valve location. The 2-wire run starts at the controller and
connects in series, to each valve location. The 2-wire run starts at the controller and
connects in series, to each valve location. The 2-wire run starts at the controller and
ends at the last decoder/valve for that wire run. See Pg. 8
1) Do not loop the eld wires back to the controller or any part of the eld wiring.
1) Do not loop the eld wires back to the controller or any part of the eld wiring.
2) Do not connect the eld wires of one controller with those of another control
2) Do not connect the eld wires of one controller with those of another control
One of the most critical installation requirements of a Two Wire system is the quality of
your wire connections. If you follow these directions you will have a reliable, depend
your wire connections. If you follow these directions you will have a reliable, depend
able control system for many years. It is suggested to solder all decoder (red wire) con
able control system for many years. It is suggested to solder all decoder (red wire) con
nections to your main two-wire run. Next install the soldered two-wire connection in a
nections to your main two-wire run. Next install the soldered two-wire connection in a
waterproof underground connector housing. When soldering is impractical, a waterproof
waterproof underground connector housing. When soldering is impractical, a waterproof
“dry-type” connection such as the Hit Products DBC-BR wire connector is required. The
“dry-type” connection such as the Hit Products DBC-BR wire connector is required. The
above mentioned products will provide an uncontaminated, dry connection.
above mentioned products will provide an uncontaminated, dry connection.
Do not use pre-lled wire nut connectors as they will impede the transfer of the
Do not use pre-lled wire nut connectors as they will impede the transfer of the
Do not use pre-lled wire nut connectors as they will impede the transfer of the
Do not use pre-lled wire nut connectors as they will impede the transfer of the
signal through the wire splice.
signal through the wire splice.
signal through the wire splice.
signal through the wire splice.
(24 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern